Catalyst 9200L 24-port PoE+ 4x10G uplink Switch, Network Essentials, Refurbished, C9200L-24P-4X-E
|Cisco IOS XE - Network Essentials
|Data Only (StackWise)
|Hot Swappable Modules
|Hot Swappable Fans
|Hot Swappable Power Supply
|Min Operating Temp
|Max Operating Temp
|Jumbo Frame Support
|Min Storage Temp
|Max Storage Temp
|5 - 90% (non-condensing)
|5 - 90% (non-condensing)
|Ac Input Voltage
|100 to 240 VAC
|2 Total, Redundant
|8K IPv4 direct routes; 1500 IPv6 entries
|Available PoE Power
|Forwarding Rate Based On 64-Byte Packets
|23°F to 113°F
|4 x 10G SFP+
|Max Active VLANS
|Switched Virtual Interfaces (SVI's)
|Total Multi-Gigabit Ethernet Ports
|Max PoE Power
|Switching Capacity W/Stacking
|Forwarding Rate W/Stacking
|QoS Scale Entries
|ACL Scale Entries
|Rack Units Consumed
Cisco Catalyst 9200 Series Switch | (24) 10/100/1000 PoE+ Ports | 4 x 10G Uplink | Network Essentials | Refurbished | C9200L-24P-4X-E
Switch comes with 9200 Series Accessory kit including rack mount kit, power cord, and console cable.
|24 Full PoE+
|Switching Capacity w/Stacking
|4 x 1/10G
|MAC Address Table Size
|370W (default); 740W (max)
|2GB DRAM (standard)
|VLAN IDs available
|Max Active VLANs
|Max Stacking Units
|Energy Efficient Ethernet (EEE)
|Cisco IOS XE
|390,310 hrs MTBF (Mean Time Before Fail)
|Forwarding Rate w/Stacking
- Fixed (4 x 10G SFP+)
Upgrade your network to the Cisco Catalyst 9200 series of switches to take advantage of simplicity without compromise. These switches extend the power of intent-based networking and help users to simplify complexity, optimize IT, and reduce operational cost. This switch family features a combination of fixed stackable as well as modular switches that all run on the same Cisco IOS operating system as well as the same ASIC family. The series allows for maximum resiliency with dual redundant power supplies and fans which are field replaceable on many models. The 9200 series feature StackWise technology with up to 160 Gbps of stacking bandwidth to allow users to manage a stack of switches as a single virtual unit.
- Up to 80 Gb of Stacking Bandwidth - The 9200L switches feature StackWise®-80 technology allowing for up to 80 Gbps of stacking bandwidth. This technology enables users to manage a stack of switches as a single virtual switch. Note: Fixed stacking is not supported. You cannot stack 9200L (fixed modules) switches with 9200 (modular uplink) switches or with other series of Catalyst switches.
- Support for Dual Redundancy - These switches support dual redundancy for fans and power supplies allowing users to maximize resiliency and reduce downtime.
- Up to 740 PoE+ - This switch offers 370W of default PoE+ and is capable of a maximum of up to 740W PoE+ with the addition of a secondary power supply.
|Cisco Catalyst 9000 Series Overview
|All About Cisco Catalyst 9200 Series Switches
|Difference Between Cisco 9200 and 9300 Series Switches
Risk Free Purchase, Hassle Free Returns. AWESOME is GUARANTEED
After receiving your order, take a full month to try it out. If you decide it's not right for you, or if you're not completely satisfied in every way - if it's not AWESOME, we'll take it back and refund your money. Your complete satisfaction is GUARANTEED or your money back. That's Awesome.Awesome That Never Ends.
Everything you purchase from CablesAndKits is covered by a LIFETIME Warranty including a LIFETIME Advance Replacement Guarantee. The AWESOME never ends.
We understand that in the event of a product malfunction or failure long downtimes are not an option. If you experience a malfunction or failure with a product at any point during your ownership we'll ship a replacement the same day you report the issue. We'll even expedite the shipment if requested, with an effort to provide a delivery date and time that meets your needs. That's Awesome.
Terms and Conditions apply. Click here for details.