Catalyst 9200L48-port PoE+ 4x1G uplink Switch, Network Essentials, NIB, C9200L-48P-4G-E
| Condition | |||
|---|---|---|---|
| Refurbished | $2,499.99 | ||
| Factory Sealed | $4,399.99 | ||
| Port Quantity | 48 | Series | Catalyst 9200 |
| Rack Units | 1RU | Software | Cisco IOS XE - Network Essentials |
| OSI Layer | L2 | Stacking | Data Only (StackWise) |
| Deployment Pack | No | Hot Swappable Modules | No |
| Hot Swappable Fans | No | Hot Swappable Power Supply | No |
| Energy Efficient | Yes | PoE Compatibility | PoE+ |
| Port Speed | 10/100/1000 | Ram | 2 GB |
| Group On | Condition | Flash | 4GB |
| Min Operating Temp | 23° F | Max Operating Temp | 113°F |
| Jumbo Frame Support | 9,198 byte | Predicted Reliability | 347,760 hours |
| Mac Addresses | 16K | Vlan Ids | 4K |
| Min Storage Temp | -40°F | Max Storage Temp | 158ºF |
| Operating Humidity | 5 - 90% (non-condensing) | Storage Humidity | 5 - 90% (non-condensing) |
| Ac Input Voltage | 100 to 240 VAC | Fans | 2 Total, Redundant |
| Stacking Bandwidth | 80 Gbps | Unicast Routes | 8K IPv4 direct routes; 1500 IPv6 entries |
| Available PoE Power | 740W | Forwarding Rate Based On 64-Byte Packets | 77.38 mpps |
| Power Specifications | 100-240VAC, 50-60Hz | Operating Temp | 23°F to 113°F |
| Uplink Interfaces | 4 x SFP | Max Active VLANS | 1024 |
| Switched Virtual Interfaces (SVI's) | 512 | Brand | Cisco |
| Total Multi-Gigabit Ethernet Ports | None | Switching Capacity | 104 Gbps |
| Switching Capacity W/Stacking | 184 Gbps | Forwarding Rate W/Stacking | 137 mpps |
| QoS Scale Entries | 1000 | ACL Scale Entries | 1500 |
Cisco Catalyst 9200 Series Switch | (48) 10/100/1000 PoE+ Ports | 4 x 1G Uplink | Network Essentials | Factory Sealed | C9200L-48P-4G-E
Unit comes with (1) power supply and (2) fans installed. Includes rack mount kit, power cord, and console cable.
Quick Specs:
| Manufacturer | Cisco |
|---|---|
| Model # | C9200L-48P-4G-E |
| Condition | Factory Sealed |
| Ports | 48 Full PoE+ + 4 x 1G Uplink |
| Uplinks | 4 x 1G Fixed Uplinks |
| Port Speed | 10/100/1000 PoE+ |
| PoE Spec | PoE+ |
| PoE Wattage | 740W (default); 1440W (max) |
| Switching Capacity | 104 Gbps |
| Switching Capacity w/Stacking | 184 Gbps |
| Forwarding Rate | 77.38 Mpps |
| Forwarding Rate w/Stacking | 137 Mpps |
| Stacking Support | StackWise®-80 |
| Stacking Bandwidth | 80 Gbps |
| Flash | 4GB Flash |
|---|---|
| DRAM | 2GB DRAM (standard) |
| MAC Address Table Size | 16k |
| VLAN IDs available | 4096 VLANs |
| Max Active VLANs | 1024 |
| Max Stacking Units | 8 |
| Total SVIs | 512 |
| Fans | (2) Fixed Redundant |
| Energy | Energy Efficient Ethernet (EEE) |
| Software | Network Essentials |
| Operating System | Cisco IOS XE |
| Predicted Reliability | 347,760 hrs MTBF (Mean Time Before Fail) |
| Rack Units | 1RU |
| Warranty | Lifetime |
- Power Supply: PWR-C5-1KWAC
- Blank: PWR-C5-BLANK
- Power Cord: CAB-TA-NA
- Fixed (4 x 1G SFP)
The following transceiver modules are compatible with Cisco Catalyst C9200L-48P-4X-E switches:
- GLC-GE-100FX
- GLC-T
- GLC-TE
- GLC-BX-D
- GLC-BX-U
- GLC-EX-SMD
- GLC-SX-MM-RGD
- GLC-LX-SM-RGD
- GLC-ZX-SM-RGD
- GLC-SX-MMD
- GLC-LH-SMD
- GLC-ZX-SMD
- CWDM-SFP-XXXX
Upgrade your network to the Cisco Catalyst 9200 series of switches to take advantage of simplicity without compromise. These switches extend the power of intent-based networking and help users to simplify complexity, optimize IT, and reduce operational cost. This switch family features a combination of fixed stackable as well as modular switches that all run on the same Cisco IOS operating system as well as the same ASIC family. The series allows for maximum resiliency with dual redundant power supplies and fans which are field replaceable on many models. The 9200 series feature StackWise technology with up to 160 Gbps of stacking bandwidth to allow users to manage a stack of switches as a single virtual unit.
Features:
- Up to 80 Gb of Stacking Bandwidth - Stack up to 8 switches and achieve up to 80 Gbps of stacking bandwidth with this switch! The ability to increase network capacity with additional bandwidth makes this switch perfect for high-performance applications. The ease of stacking also helps to simplify management and reduce costs by cutting down on the need for extra cabling and power supplies. Note: You cannot stack 9200L (fixed modules) switches with 9200 (modular uplink) switches or with other series of Catalyst switches.
- Support for Dual Redundancy - These switches help to ensure high availability and reliability with support for dual redundant fans and power supplies. When a second power supply is installed, it provides backup protection and helps to prevent downtime in the case of a failure.
- Up to 1440W PoE+ - This switch features 740W of default PoE power but is capable of reaching up to 1440W of PoE+ with the installation of a second power supply!
C9200L-48P-4G-E Toolkit
Media:
|
| Cisco Catalyst 9000 Series Overview |
|
| All About Cisco Catalyst 9200 Series Switches |
|
| Difference Between Cisco 9200 and 9300 Series Switches |
Risk Free Purchase, Hassle Free Returns. AWESOME is GUARANTEED
After receiving your order, take a full month to try it out. If you decide it's not right for you, or if you're not completely satisfied in every way - if it's not AWESOME, we'll take it back and refund your money. Your complete satisfaction is GUARANTEED or your money back. That's Awesome.
Awesome That Never Ends.Everything you purchase from CablesAndKits is covered by a LIFETIME Warranty including a LIFETIME Advance Replacement Guarantee. The AWESOME never ends.
We understand that in the event of a product malfunction or failure long downtimes are not an option. If you experience a malfunction or failure with a product at any point during your ownership we'll ship a replacement the same day you report the issue. We'll even expedite the shipment if requested, with an effort to provide a delivery date and time that meets your needs. That's Awesome.
Terms and Conditions apply. Click here for details.