Catalyst 9200L 24-port Data 4x1G uplink Switch, Network Essentials, NIB, C9200L-24T-4G-E
| Condition | |||
|---|---|---|---|
| Refurbished | $1,499.99 | ||
| Factory Sealed | $2,299.99 | ||
| Port Quantity | 24 | Series | Catalyst 9200 |
| Rack Units | 1RU | Software | Cisco IOS XE - Network Essentials |
| OSI Layer | L2 | Stacking | Data Only (StackWise) |
| Deployment Pack | No | Hot Swappable Modules | No |
| Hot Swappable Fans | No | Hot Swappable Power Supply | No |
| Energy Efficient | Yes | PoE Compatibility | No PoE |
| Port Speed | 10/100/1000 | Ram | 2 GB |
| Group On | Condition | Flash | 4GB |
| Min Operating Temp | 23° F | Max Operating Temp | 113°F |
| Jumbo Frame Support | 9,198 byte | Mac Addresses | 16K |
| Vlan Ids | 4K | Min Storage Temp | -40°F |
| Max Storage Temp | 158ºF | Operating Humidity | 5 - 90% (non-condensing) |
| Storage Humidity | 5 - 90% (non-condensing) | Ac Input Voltage | 100 to 240 VAC |
| Fans | 2 Total, Redundant | Stacking Bandwidth | 80 Gbps |
| Unicast Routes | 8K IPv4 direct routes; 1500 IPv6 entries | Available PoE Power | No PoE |
| Forwarding Rate Based On 64-Byte Packets | 41.66 mpps | Power Specifications | 100-240VAC, 50-60Hz |
| Operating Temp | 23°F to 113°F | Max Active VLANS | 1024 |
| Switched Virtual Interfaces (SVI's) | 512 | Brand | Cisco |
| Switching Capacity | 56 Gbps | Switching Capacity W/Stacking | 136 Gbps |
| Forwarding Rate W/Stacking | 101 mpps | QoS Scale Entries | 1000 |
| ACL Scale Entries | 1500 |
Cisco Catalyst 9200 Series Switch | (24) 10/100/1000 Ports | 4 x 1G Uplink | Network Essentials | Factory Sealed | C9200L-24T-4G-E
Switch comes with 9200 Series Accessory kit including rack mount kit, power cord, and console cable.
Quick Specs:
| Manufacturer | Cisco |
|---|---|
| Model # | C9200L-24T-4G-E |
| Condition | Factory Sealed |
| Ports | 24 Data |
| Rack Units | 1RU |
| Port Speed | 10/100/1000 |
| Switching Capacity | 56 Gbps |
| Switching Capacity w/Stacking | 136 Gbps |
| Forwarding Rate | 41.66 Mpps |
| PoE Spec | No PoE |
| Stacking Bandwidth | 80 Gbps |
| Uplink Ports | 4 x 1G |
| Flash | 4GB Flash |
| MAC Address Table Size | 16k |
| PoE Wattage | No PoE |
|---|---|
| DRAM | 2GB DRAM (standard) |
| Stacking Support | StackWise®-80 |
| Fans | Fixed Redundant |
| VLAN IDs available | 4096 VLANs |
| Max Active VLANs | 1024 |
| Max Stacking Units | 8 |
| Total SVIs | 512 |
| Energy | Energy Efficient Ethernet (EEE) |
| Software | Network Essentials |
| Operating System | Cisco IOS XE |
| Predicted Reliability | 531,030 hrs MTBF (Mean Time Before Fail) |
| Forwarding Rate w/Stacking | 101 Mpps |
| Warranty | Lifetime |
- Power Supply: PWR-C5-125WAC
- Blank: PWR-C5-BLANK
- Power Cord: CAB-TA-NA
- Fixed (4 x 1G SFP)
The following transceiver modules are compatible with Cisco Catalyst C9200L-48P-4X-E switches:
- GLC-GE-100FX
- GLC-T
- GLC-TE
- GLC-BX-D
- GLC-BX-U
- GLC-EX-SMD
- GLC-SX-MM-RGD
- GLC-LX-SM-RGD
- GLC-ZX-SM-RGD
- GLC-SX-MMD
- GLC-LH-SMD
- GLC-ZX-SMD
- CWDM-SFP-XXXX
If you're looking to upgrade your network with a Cisco Catalyst 9200 series switch, the C9200L-24T-4G-E is a perfect starting point! Perfect for small businesses as well as large enterprises and everything in between, this fixed-module switch features (24) Ethernet data ports as well as 4 x 1G SFP fixed uplinks giving you the bandwidth you need to keep your network running smoothly. This Layer 2 switch was designed to facilitate the transfer of data between network devices, allowing you to easily connect multiple devices within your network such as computers, printers, servers, and more!
Features:
- High Performance Switch - This high-performance switch strikes the perfect balance of fast data transfer speeds, low latency, and high bandwidth making it ideal for bandwidth-intensive applications including streaming, VoIP, and data backup among many other high bandwidth uses!
- Up to 80 Gb of Stacking Bandwidth - With up to 80 Gbps of stacking bandwidth thanks to StackWise-80 technology, you can use this as a standalone switch or as part of a stack! Note: Fixed stacking is not supported. You cannot stack 9200L (fixed modules) switches with 9200 (modular uplink) switches or with other series of Catalyst switches.
- Energy Efficient Design - When running a network, it's important to keep costs down wherever possible. These switches were designed to be energy-efficient with features such as Energy Efficient Ethernet (EEE) and low-power modes to help you reduce power consumption and lower engery costs.
Media:
|
| Cisco Catalyst 9000 Series Overview |
|
| All About Cisco Catalyst 9200 Series Switches |
|
| Difference Between Cisco 9200 and 9300 Series Switches |
Risk Free Purchase, Hassle Free Returns. AWESOME is GUARANTEED
After receiving your order, take a full month to try it out. If you decide it's not right for you, or if you're not completely satisfied in every way - if it's not AWESOME, we'll take it back and refund your money. Your complete satisfaction is GUARANTEED or your money back. That's Awesome.
Awesome That Never Ends.Everything you purchase from CablesAndKits is covered by a LIFETIME Warranty including a LIFETIME Advance Replacement Guarantee. The AWESOME never ends.
We understand that in the event of a product malfunction or failure long downtimes are not an option. If you experience a malfunction or failure with a product at any point during your ownership we'll ship a replacement the same day you report the issue. We'll even expedite the shipment if requested, with an effort to provide a delivery date and time that meets your needs. That's Awesome.
Terms and Conditions apply. Click here for details.