LC-LC 100 Gigabit Multimode Duplex 50/125 OM5 Fiber Optic Cable, 1M, 5 Pack

1 Meter | OM5 Fiber Optic Patch Cable | 100 Gigabit | Multimode Duplex | OFNR Jacket | 50/125 | Standard Connectors | 5 Pack| UPC

OM5 fiber cables, the first approved as WBMMF (Wide Band Multimode Fiber), have been created to specifically handle high speed data center applications with using two fibers to transmit from 40GBs up to 100GBs. With the emergence of SWDM (Shortwave Wavelength Division Multiplexing) applications in data centers, OM5 fiber cables provide optimal support and performance at the higher speeds. Even with the high speed, OM5 fiber cables are backward compatible with existing OM4 applications and networks.

There are two basic types of fiber cabling, single-mode and multi-mode. The cables listed here are multi-mode. Inside these cables you will find three basic layers. Starting from the inside, you have the core which is surrounded by the cladding. Both are protected with the jacket on the outside. Multi-mode cables have a thicker "core size". The core size is simply the thickness of the optical fiber inside the cladding. The cladding is material that surrounds that core which basically serves as the boundary for the signal, keeping the light refined to the core and not allowing it to escape. The thicker the core size, the more refraction the signal exhibits, the more signal degradation that occurs and the shorter the distance an intelligible signal can transmit. For example, these cables are 50/125. 50 is the diameter of the core, and 125 is the diameter of the cladding, both in micrometers. Lastly, the jacket is the part of the cable you see. This layer protects the cable and provides easy identification based on its color.

Our CablesAndKits OM5 fiber cables come in 2 connector types - Standard and Uniboot w/Push-Pull Tab.

The standard unibody, short boot connector on the OM5 fiber cables provide you with the normal fiber cable experience with a high-quality performance and ease of use, as well as the ability to reverse polarity when needed.

Our high-density OM5 uniboot / unibody fiber optic cables have two fibers carried through a single jacket with a lower profile boot, reducing the size and surface area of the cables when compared to standard fiber optic cables, but continuing to provide the reliable performance from industry standard connectors. Uniboot fiber cables reduce cable management requirements and allow for better airflow.

The OM5 high-density Push-Pull Tab connector / boot on our fiber optic cables have a special tab that will allow easy insertion and removal of the connector without the need to access the boot or connector. The slim, low profile uniboot design allows this high-density installation cabling to be used with minimal cable management and save space in your network setup. These fiber cables have the same type of short boot connector as the regular uniboot/unibody cables, but with the push-pull tab, still allowing you to reverse the polarity when needed.

Quick Specs:

Why IT Pros Prefer Fiber

Risk Free Purchase, Hassle Free Returns. AWESOME is GUARANTEED

After receiving your order, take a full month to try it out. If you decide it's not right for you, or if you're not completely satisfied in every way - if it's not AWESOME, we'll take it back and refund your money. Your complete satisfaction is GUARANTEED or your money back. That's Awesome.

Everything you purchase from CablesAndKits is covered by a LIFETIME Warranty including a LIFETIME Advance Replacement Guarantee. The AWESOME never ends.

We understand that in the event of a product malfunction or failure long downtimes are not an option. If you experience a malfunction or failure with a product at any point during your ownership we'll ship a replacement the same day you report the issue. We'll even expedite the shipment if requested, with an effort to provide a delivery date and time that meets your needs. That's Awesome.

Terms and Conditions apply. Click here for details.